While maintaining an HVAC system is a homeowner’s responsibility, they aren’t all sure how to perform it properly. Learning about selecting the ins and outs of choosing an HVAC professional to maintain or repair your system is a smart homeowner. This article will provide you with that.
Before you start calling to find someone to fix your unit, make sure you know the type of system that is installed. It is important to understand what model it is and which brand it is. Also, if it has been serviced before, you should have that information handy. If you have to have someone come out to repair the unit, you will be able to help the contractor understand more about what is going on.
Know what work you need before you hire a contractor. It will be difficult for a contractor to give you a price estimate over the phone if they have not seen your current setup is. It will be way more hard if you don’t know what’s wrong.
If problems arise with the HVAC system, check the entire house before contacting someone to come for repairs. Note which rooms are hot and which are cold. This can help the contractor determine the problem areas quickly and fix the problem easily.
Clean the fan blades and coils each spring to ensure that your condenser fan operates at it’s best. Clean the outside of your external condenser unit.
Before choosing a HVAC company find out what the company offers. It’s hard for these contractors to give phone estimates without seeing the current system you have. If you can’t explain changes you’ve made, the process will be even more difficult. Understand this information beforehand.
Clean the debris off your condenser unit. Debris can pile up after a storm, and this can foul up the inner workings of your system. It will damage the system to malfunction by overheating.
Keeping the outside condenser clean of debris and leaves will improve the system’s efficiency. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. Clean the outside of your condenser unit regularly.
Turn the power off so you don’t get hurt or break something. Then, take the grill off, pull the blades out, and begin cleaning the unit and them gently.
Each spring it’s time to clean the inside of your condenser unit, including the fan and the sensitive coil. Before you get started, cut the power. Next, pop off the grill, pull out the blades and start cleaning them and the unit itself off gently.
When you mow your lawn, take care that you don’t get grass clippings all over your outdoor unit. Aim the grass in a different direction from the unit. This same tip applies when you are blowing fallen leaves around the yard. Grass and leaves pose a serious problem for the internal functioning of your unit.
Don’t get grass clippings pile up against your outdoor condenser. Aim the grass clippings in a different direction from the other direction. This applies when you are taking care of the leaves in debris.
Lubricate your fan condenser if it has oil ports. These ports have a metal covering. Sometimes it is rubber. Put 10 drops of lightweight, non-detergent SAE oil in each port. Be careful not to use too much.
Your outdoor HVAC units might suffer when your trees start to lose leaves. Make sure the unit’s fan grill is cleaned frequently when the fall. The fan must not have anything in the way so that air can flow into it, and if debris is blocking this air flow, it could cause your system to break down.
Put your outdoor unit in places with shade. You save money this way because the air conditioner is now pulling in cooler air, which is easier to cool further.
Put your outdoor unit in the shade if you are installing them.
It is very important that your HVAC system is serviced two times a year. Generally, you want it done in the fall and the spring. Even though it may seem as nothing is wrong with the unit, a simple inspection can prove otherwise.
Have the HVAC system inspected twice a year. This should happen in the fall and again in the spring.
Replace any single-paned windows with double-paned versions. Double pane windows will allow you to use less air during the summer because cooler air will stay in your house. This also works during the cold months to keep the warm air inside.
A programmable thermostat is a simple way to help you save money on your air conditioning costs. Some of these thermostats can even be controlled from your smart phone or other device.
Don’t allow your home to overheat. Air conditioners can cool a home by just twenty degrees in a short time. If the temperature in your home rises to 100 degrees F or higher, cooling it will only drop the temperature to 80 degrees F. When you factor in humidity, this can still be dangerously hot for the human body at rest.
Companies with proven track record that you can use to decide if they are worth the time and money. Hiring a new contractor who is just starting out can be risky.
Occasionally, air conditioners ice up. The drain line may also freeze up. If this happens, turn the thermostat so it is on fan only mode, which will disable the compressor. It’s a good idea to call up professionals to help with this even though you can get the ice to melt when you switch everything to the fan.
A working HVAC system is crucial for a comfortable home. But, if you aren’t sure who to call, it can be quite frustrating. Luckily, armed with the above information, each homeowner can do what needs to be done.
Use an online sizing calculator to help you calculate the proper size of the air conditioning unit you should purchase. If you purchase something too large, you will be throwing away money. Check your manual to figure out what the rating is from the manufacturer to be sure you’re getting the right information.