Lots of people have HVAC systems placed in their houses. An HVAC is a unit is designed to keep a house at a comfortable for you throughout the year. You will likely need to hire a contractor to install and maintain it. Keep reading for a few good HVAC system running well.
If your HVAC is running into problems, check out each room in your house before calling for assistance. Notice the temperature in each room. Are some cooler or hotter than others? This will help the repairman determine what the problem is.
Know what type of system before calling someone to fix it. This will enable you give the new contractor the necessary information.
When you call an HVAC system for help, you need to be aware of what you need them to do before calling. This is necessary so that they can give you a quote before doing any work. Getting an estimate will be even more difficult if you cannot adequately describe the problem. Having this information handy will make the process much smoother.
Know what work you need before you hire a contractor. A contractor cannot give an over-the-phone estimate without looking at your system. It will be more hard if you can’t figure out what they need to do.
To make sure your condenser fan works properly, keep the fan blades and the coils clean. Before you clean the unit, be sure to turn off the power. If you see debris, get rid of it.
Clean your fan and coils each spring to ensure that your condenser fan operates at it’s best. Clean the outside of your condenser as well.
If your unit is outdoors, clean them regularly. Things tend to pile up around these units, especially after storms come through, which could cause problems to your system. It may begin to overheat, causing massive damage.
Clean the debris on your outdoor condenser units. You don’t know when things are going to pile up, especially after a windy or rainy storm, and that can throw a wrench in your system. It could overheat and cause your system to malfunction by overheating.
Make certain that you clean your condenser when the weather begins to warm. First, make sure the power is off to ensure nothing moves while you are working. Then remove the grill, remove the blades and clean it from top to bottom gently.
Turn the power off first so you don’t get hurt or break something. Then, take the grill off, pull the blades out, and begin cleaning the unit and them gently.
Your outdoor HVAC units might suffer when your trees lose leaves. Clean outdoor units often to remove leaves. Your fan needs an unobstructed way to get air inside, and the more blocked up it becomes, the more headaches will develop for you with the system.
Your HVAC units might suffer when your trees lose their leaves.Make sure you clean out your fan grill is cleaned frequently when the leaves begin to fall. The fan needs unobstructed air flow, and if it becomes blocked, then your system could suffer.
A shady spot is always a good choice for the placement of your outdoor compressor. When the unit sucks in cooler air, then less work is required to cool it further which in turn boosts the units efficiency.
Sae 20 Oil
Once it gets cold outside, you should turn off the outdoor condenser unit. This should be done when the temperature drops below 60ÂºF to avoid damage. You will save in repair bills and increase the efficiency of your system.
Lubricate your condenser once each year. You will notice these ports covered with rubber or metal cap covering them. Use SAE 20 oil that is non-detergent and lightweight, detergent-free SAE 20 oil, putting 10 drops in each port.
If you are a homeowner, or if you can get permission from your landlord, install double-paned windows in place of any single panes in your home. Double pane windows help minimize your air conditioning use in the summer by keeping the cooler air inside your home. It also facilitates heat retention in winter.
As this article has shown you, you can do quite a bit to get help your HVAC system work properly. Always make sure your unit is installed and maintained correctly. Using these tips will ensure your comfort for many years to come.
Keep energy costs from rising by having your system serviced annually. The contractor should oil the parts that move and check the motor and freon levels. These easy to do things are going to allow your system to run its best.