If you’re not familiar with HVAC and you need to be in the know, this article is fa great place to start. This article will help you learn some basics about this. Take the time to read along and you will do just fine.
Before you contact people to assist you in getting your system fixed, know what kind of system you’re working with in the first place. Get information on the make and model, plus if you have information on the history of maintenance, that will help, too. This makes sure your contractor will be sufficiently prepared.
Know what type of your HVAC system before calling someone to fix it.This will help you to give the new contractor the necessary information.
Before you hire an HVAC contractor, have some sort of idea of the work that needs to be done. It will be difficult for an HVAC contractor to provide you with an estimate on the phone without knowing what your current setup is. If you can’t explain anything to them, this will be even more difficult. It’s a good idea to learn this information in advance.
Know what you want done before you hire a contractor. It will be hard for a contractor to give you with an estimate on the phone if they have not seen your current setup is. It will be way more hard if you over the phone without the information readily available.
Be sure to clean the fan blades and coils of the condenser fan. Shut the power off before you do anything. Remove the grill and carefully clean the blades and surrounding areas.
Clean the debris off your condenser units. Debris can pile up after a storm, and this can foul up the inner workings of your system.It could overheat and cause a disaster with your system to malfunction by overheating.
Some fan condensers may contain oil parts, and if yours does, ensure it is lubricated at least once per year. They generally have a rubber or metal cap on them. Use a lightweight oil and do not overfill them.
Turn the power off first so you don’t get hurt or break something. Then, take the grill off, pull the blades out, and begin cleaning the unit and them gently.
Put outdoor units in the shade if you are installing them. It will reduce the temperature of the air going into the unit, meaning that it will not have to work as hard to cool it.
You need to have a contractor review your unit twice a year. Your system should be inspected in Spring and Fall. This will help you to avoid problems.
Lubricate the oil ports on your condenser at least once each year. You can find these ports covered with rubber or metal cap. Use a lightweight, and put 10 drops or fewer in each port, putting 10 drops in each port.
If you can, install double-paned windows throughout your home. To keep your home cool, investing in double pane windows is a must. They help in the winter, too, keeping the heat in.
Put outdoor unit in places with shade.
A programmable thermostat is a simple way to help save money on air conditioning costs. In fact, you can save as much as 10 percent on both heating and cooling when you turn your thermostat by by 10-15 percent for at least 8 hours daily. Additionally, some models of programmable thermostats actually allow you to control them remotely from your office computer or cell phone.
Turn off your outdoor condensers you have when it’s getting cold. This should turn it off to prevent damage if the weather falls under 60 degrees Farenheit. This can keep your system working well throughout the years and save you a lot on repairs.
Save some cash by shutting down the air-conditioning system when there is no one in the house. With the system off, the house will only heat up to a certain temperature. If will be constantly fighting the heat and using lots of electricity if it is left on all day.
You can learn how to maintain your system and keep it running right. Just take the time to do it right and avoid any issues. Best of luck with your HVAC system and may the tips above continue to help for years to come.
Air conditioners occasionally freeze up, literally. In addition, the drain line sometimes freezes, and people often think that there is a plumbing leak. If you see this, put the fan on to shut the compressor off. Talk to a professional if you are unsure of how to do this.