Anyone that has an HVAC system in their home knows how it important it is to have it running right. An improperly or inefficiently functioning HVAC system that doesn’t work right is something that costs quite a lot of homeowner money.This article will give you tips to make sure your HVAC unit in tip top shape.
Be aware of the type of system that is installed in your home prior to calling a contractor to fix it. Get the brand, model name, and if you can you should get the maintenance history out. The contractor will likely need all of this information.
Know the name and type of system before calling someone to fix it. This will ensure that you to give your chosen contractor any information they need.
If you struggle with your HVAC, try touring your home before calling a professional. Make note of which rooms are cold and which are hot. This information will help the contractor determine where the problem is and how to fix it.
Know what work you need before you hire a contractor. It will be difficult for an HVAC contractor to provide you with an estimate over the phone without knowing what your current setup is. It will be more hard if you can’t figure out what they need to do.
Every spring you should clean the coils and fan blades on your condenser fan. Start by turning off the power to avoid having anything move when you work on it. Next, pop off the grill, pull out the blades and start cleaning them and the unit itself off gently.
Clean your fan blades and coils prior to summertime. Clean the outside of your external condenser unit.
Cover your unit when you are mowing the lawn. Direct the grass clippings in a direction away from the HVAC unit. The same goes for blowing leaves, so always be careful if you are moving debris near your HVAC devices.
Clean the debris that accumulates on your condenser units. You never know when things can pile up, especially after a windy or rainy storm, and that can ruin your system. It can also cause the unit to overheat and break down.
Lubricate your fan condenser if it has oil ports. They are usually fitted with a rubber or metal cap. Put about ten drops or less of a good non-detergent SAE 20 oil into each port.
Turn the power off first so nothing moves. Then, take the grill off, pull the blades out, and begin cleaning the unit and them gently.
Find a place that is shaded for your compressor. In this way, it will be cooling air that is already somewhat cooled. This saves energy.
Boost energy efficiency by putting your condenser unit in the shade. As you get your air conditioner to suck in cool air it won’t have to do too much work to cool it which saves you some money.
Your outdoor HVAC units might suffer when your trees start to lose leaves. Make sure the fan’s grill is cleaned often once nearby trees start shedding their leaves. The fan must not have anything in the way so that air can flow into it, and if it becomes blocked, it could cause your system to break down.
Have your HVAC serviced at least yearly. It’s best to have it checked before you turn it on for the summer and again for the winter. You should have it looked at even if no problems are occurring; there could still be a problem or potential problem.
Hopefully, you have gained a solid understanding of what needs to be done to keep your system in check. It can become very expensive to put off maintenance of your system. Bookmark these suggestions and refer back to them as needed.
Equipping your home with a programmable thermostat can be an excellent way to cut utility costs. These convenient thermostats may shave ten percent or more off of your bills, because they significantly cut energy use when you’re not around. Some programmable thermostats can even be controlled from a PC or other device.